These are all the parts required to make the VCS3-3D kit on a 3D printer.

For the basic version (fixed legs) you will need to print the following:

1x Bezel.3mf
1x Cable Cover Clip.stl
1x Camera Mount.stl
2x Leg.stl
1x V2_PCB_Frame.stl
1x VCS Holder.stl

For an upgraded version with an adjustable angle for the legs, you'll need to replace the 2x legs.stl with the following. 

1x Stand_adjustable_base.stl
1x Stand_adjustable_legs.stl
1x Stand_adjustable_top.stl